Weight | 0.5 kg |
---|---|
Dimensions | 5 × 5 × 5 cm |
Country of Origin | UK |
Customs Code | 8522900090 |
Customs Description | Motor power supply board; returning from repair. DAP. |
Linn Axis Motor Repair
£45.00
Linn Axis motor repair service.
We are able to repair most Linn Axis motors either open circuit or short circuit windings. We need to inspect the motors first though. Note that some Axis motors are very difficult to open – type with punched round holes between the two half cases and a successful result with these motors cannot be guaranteed.
All work will be carried out by an experienced Chartered Electrical and Electronic Engineer. Once you have ordered, details will be emailed to you on how to send the repair to us. Board will be shipped back to you via recorded delivery/courier.
Turnaround time is usually 14-21 days from when we receive your motor.
Try to ship your motor in UK small parcel size, so less than: 40 x 35 x 16 cm.
Out of stock
1 review for Linn Axis Motor Repair
Only logged in customers who have purchased this product may leave a review.
Lee Jones (verified owner) –
I discovered a problem with my 33 year old Linn Axis when someone bought me a record for Christmas, and I found that my deck wasn’t working at all. Steve helped me to fix it by providing me with a PSU service kit to replace the capacitors on the motor board, and it then worked for a few minutes before stopping …. So I sent the board back to Steve. He checked it and told me that it was working fine, but that there appeared to be some problem/resistance in the motor.
He was able to dismantle and clean it, applying lubricant at the crucial places, and recommended that I also purchase this main bearing maintenance set to lubricate the equally crucial main platter bearing.
I spent a few minutes removing the old oil and cleaning the residue away with iso-propyl alcohol, and then applied the new oil in the correct quantity. It was clear to me that it needed to be done as very much more oil went in than came out.
Once I had done this, I re-fitted the motor and power supply, and was absolutely delighted when the platter spun-up and ran continuously, allowing me to play my newest piece of vinyl.
I’m very pleased with Steve and Valhalla Electronics, and strongly recommend them to anyone having issues with their Linn Axis. This guy knows his stuff 🙂